Click the icons to see what our customers had to say.
The Drying Company serving Water View, VA
Reliable Duct Sealing, Home Energy Audits, & Insulation Contractor
The Drying Co. is a trusted dealer of Dr. Energy Saver, a nationally renowned network that is comprised of the best energy-conservation contractors across the country. We aren't just another contractor; we improve your home's energy efficiency issues, so you get the maximum energy and cost savings with the least amount of hassle. We offer a wide range of services, including:
- Attic Insulation
- Spray Foam Insulation
- Rigid Foam Insulation
- Crawl Space Insulation
- Ductwork Sealing
- Blown Fiberglass Insulation
- Cellulose Insulation
- Floor Insulation
- Home Energy Audits
- Wall Insulation
- And More!
Attic Insulation & Blown-In Cellulose
Since the attic is out of the way, many homeowners believe that their attic has enough insulation. However, 9 out of 10 times it does not. A nationwide study found that the average American attic only has about 1/3 enough insulation to keep the home properly insulated. That is why The Drying Company recommends blown-in insulation, as it forms a dense layer that ensures heat will not escape through the top of your home. When the attic is sufficiently insulated, you can cut heating and cooling costs up to 20%.
Call 1-757-330-3877 or click below to schedule a FREE blown-in or attic insulation estimate!
Water View’s Skilled Basement Waterproofing Company
Many homeowners worry about water damage. Water in the basement can be daunting, but when you partner with The Drying Company, we can help you maintain a dry and healthy environment. So, you no longer have to worry about moisture intrusion!
- We begin by inspecting your basement to identify areas where water is entering.
- From there, we recommend a waterproofing system tailored to your unique situation, along with a free, no-obligation estimate.
- After we install the waterproofing solution, which is proven to keep the basement healthy and dry for the long haul.
Our Waterproofing Solutions Include
- Waterproof Wall Coverings
- French drain systems
- Sump Pumps
- Dehumidifiers
- Crack Repair
- And more!
Crawl Space Repair & Encapsulation Experts
Since crawl spaces are hidden away under our homes, homeowners often forget they are there. However, crawl space problems can lead to potentially critical issues throughout the home, including unhealthy air quality, pest infestations, moisture intrusion, uncomfortable drafts, and mold.
That is why The Drying Company provides proven crawl space repair and encapsulation solutions, including:
- Crawl Space Insulation
- Crawl Space Encapsulation
- Crawl Space Support Jacks
- Crawl Space Dehumidifiers
- And More!
Reliable Gutter Installation & Gutter Guards in Water View
Are you ready for low-maintenance, heavy-duty seamless gutters that efficiently protect your home from water damage? GutterShutter gutter systems are designed with premium-grade aluminum, so they won’t bend under heavy debris. Our patented gutters and gutter guards are also clog-proof and prevent debris from blocking the system. They also come with a no-sag guarantee, meaning they won't detach from your property.
Protect your home from water damage with the help of your local GutterShutter dealer in Water View.
Foundation Piers, Crawl Space Jacks & Structural Damage Repairs
Need a professional foundation repair company to fix structural damage and prevent future problems? Contact the experts at The Drying Company! We offer industry-leading tools and strategies that ensure durable, lasting results. From foundation settlement to sagging floors above the crawl space or foundation wall cracks, we fix these issues and more!
Our foundation repair solutions include:
- Push Piers
- Helical Piers
- Crawl Space Jacks
- And More!
Get a free foundation repair estimate to learn more. We serve homeowners in Water View and nearby!
A Water View, VA homeowner reached out to us because they had noticed moisture issues in their crawl space. The insulation was saturated, and they were concerned that the joists were compromised. They wanted to repair the damage and protect their home from future problems.
At the inspection, we discovered that moisture and bulk water were a chief concern. Water had eroded a trench around the perimeter of the foundation walls. This water evaporates into the crawl space raising relative humidity (RH). In addition, moisture was dumping into the crawl space through open vents and water vapor was rising from the earth. As the RH increases over 60%, mold and mildew growth can begin. Moisture is absorbed by porous materials such as the wood substructure of the home and fiberglass insulation.
The fiberglass insulation is damaged by the moisture, which degrades the fibers causing them to pull apart and fall. The added weight of the moisture also causes the batts to fall away from the floors. The wood also absorbs water, increasing its wood moisture content. When the wood moisture content reaches about 19% or higher, wood rot can begin. If left untreated, this can lead to significant damage to the foundation.
To address the moisture concerns and protect the foundation and home from further damage we proposed an interior foundation drainage system and crawl space encapsulation. First, we want to install a drainage system that will collect the bulk water flowing into the crawl space and direct it to a sump pump. A drainage system is necessary even when encapsulating because bulk water can penetrate the vapor barrier, which is only designed to be a vapor suppression system, not deter excess water.
We then want to treat any mold and mildew with an antimicrobial, to kill the mold. Then, we would seal the crawl space from the earth’s moisture using the CleanSpace Vapor Barrier. CleanSpace is a heavy-duty crawl space liner designed to withstand being crawled on by service persons. When installed, CleanSpace is sealed at all seams, wrapped around all piers and sealed, and mechanically attached and sealed to foundation walls 6-8 inches above outside grade.
Then we would seal the rim and band, sill plate, vents, and any utility penetrations to the outside with foam. Air sealing the crawl space addresses all the natural holes that occur during a home’s construction and prevents air and moisture from flowing into the space. Then we want to insulate the crawl space walls with either closed-cell spray foam or foam board insulation. Insulating from the crawl space walls allows us to extend the thermal barrier of the home to the crawl space floor. It also reduces heat transfer through the foundation walls. A friction fit door, which offers both air sealing and insulation behind the exterior crawl space door would also be installed.
The final piece is installing a SaniDry Sedona Dehumidifier. Though we have prevented as much outside air from finding its way into the crawl space as possible, we still need to control the relative humidity. The SaniDry Sedona is specifically designed for crawl spaces and basements. The unit is set to kick on when relative humidity reaches about 55%. It pulls excess moisture from the air and filters it, then circulates dry air throughout the crawl space. With every dehumidifier, we install a hygrometer which allows the homeowners to monitor the relative humidity and temperature of their crawl space from insider their home. The display unit also reads the temperature and RH inside the home.
Taking this route to control relative humidity will protect their foundation from moisture and wood rot. As an added benefit, they will have better indoor air quality, lower energy bills, and be more comfortable in their home.
